Rinnai RL75iN Interior Natural Gas Tankless Water Heater 7.5 GPM
Rinnai R75iN is a solidly built tankless heater that delivers water constantly around the home. It has a capacity to deliver 7.5 gallons of hot water, which makes it suitable for 2 showers and 1 sink in a home. Mount your heater in any room with the vent towards the outside on the wall or roof.
Rinnai R75iN is a solidly built tankless heater that delivers water constantly around the home. It has a capacity to deliver 7.5 gallons of hot water, which makes it suitable for 2 showers and 1 sink in a home. Mount your heater in any room with the vent towards the outside on the wall or roof and you’ll never worry about scheduling water for mornings or evenings. Keep reading our TopTenWater.com evaluation of this Rinnai tankless water heater for more details.
Don’t worry where you mount the gas-operated RL75iN. Being compact, you can install it in any room with the vent directly facing outside. The heater comes with wall mounting hardware, isolation valve, pressure relief valve, and a digital controller. The Rinnai RL75iN is an Energy-Star qualified heater, which was designed with efficiency in mind. The heater comes with a built-in temperature system which regulates the heat exchange and ensures hot water is delivered much faster. In addition, the heater uses less power so you’ll have little to worry about energy consumption.
Like other models in the series, the Rinnai RL75iN is an ecofriendly unit which requires no extra technicalities to eradicate greenhouse gases. It’s not only GSA Approved, but fully meets both California and Texas NOx Emissions Standards. Rinnai RL75iN is a compact unit that is both easy to install and takes up less space in a home. The heater can fit almost anywhere you want to mount it.
- Temperature/heat lock not only controls the temperature but prevents accidental or unintended change of water temperature while the RL75IN is running.
- Enhanced scale detection (digital meter) gives users updates of wear and tear and ensures the unit operates safely, thus, minimizing the possibility of replacement while prolonging its usage.
- Delivers 7.5 gallons of hot water per minute to multiple fixtures at a temperature of40°F
|Compact design||Water temperature is flow dependent|
|Reliable supply of hot water||No assurance of warranty for online purchase|
|Highly efficient||Highly sensitive and can break down|
|Low operational cost||Complicated to service|
- Indoor installation only
- 82% thermal efficiency
- Natural gas/propane fuel
- Energy Star qualified
- Pre-set at 120°F
- Electronic ignition
- 180,000 maximum BTU
- 22.9″ H x 14″ W x9.6″ D
|Water Connection Location||Bottom|
|ENERGY STAR® Qualified||Yes|
|Vent Type||Direct Vent|